Panasonic BB-HGW700A Operating Instructions Manual page 100

Operating Instructions
Application E-mail
This function allows you to set mail forwarding used in the application platform function.
• This setting may be necessary depending on the application.
1.
Click [E-mail Setup for Applications].
2.
Set each heading and click [Save].
3.
Click [Restart].
Data Entry Field
SMTP Server IP
Address or Host Name
POP3 Server IP
Address or Host Name
Login ID
Password
Reply E-mail Address*
Destination E-mail
Address 1 - Destination
E-mail Address 5*
*1 Set 4 numbers (0-255) and 3 periods, in the form of 192.163.0.253 (However 0.0.0.0 or
255.255.255.255 cannot be used.)
*2 Only alphanumeric characters can be used. However, [Space], ["], ['], [#], [&], [%], [=], [+], [?], [<],
[>], and [:] cannot be used.
*3 When POP3 authentication is required during mail forwarding, set it, checking with the network
administrator or ISP.
Note
SMTP authentication is not supported.
100
Enter the sent mail (SMTP) server's address*
characters)*
Enter the received mail (POP3) server's address*
255 characters)*
Enter the received mail (POP3) server's login ID.*
Enter the received mail (POP3) server's password.*
2
Enter the return destination's (sent source) E-mail address. It is
recommended that you enter the administrator's E-mail Address.
Up to 5 E-mail destinations can be set.
2
2
.
2
.
1
or host name (1-255
1
or host name (1-
3
3