To Specify The Bypass Reserve Settings For The Bypass Tray - Konica Minolta bizhub c350 User Manual

Hide thumbs Also See for bizhub c350:

Table of Contents

3.6 Selecting a Paper/Size Setting

Touch either [1] or [2] to

select the paper size.

Touch [Enter], and then

touch [Enter] in the Size

Input screen.

The paper size for the

1st drawer is set to the

recalled size.

To specify the Bypass Reserve settings for the bypass tray

If paper of the desired size or type is not loaded into any paper drawer or the bypass

tray, the Bypass Reserve settings can be specified so that printing can begin when

paper of the appropriate size is loaded into the bypass tray.

The "Bypass Reserve" function can be set only if "Auto Paper Select" is

specified on the screen that appears when [Paper/Size] is touched.

Load the document to be copied, and then press the [Start] key.

After scanning of the document begins, the message "Matching paper size is

not available Reselect paper size." appears, and scanning stops.

For details on positioning the document, refer to "Feeding the Document" on

Touch [Bypass

Reservation screen