Storing Copy Programs - Konica Minolta bizhub c350 User Manual

10.2 Programming/Recalling Copy Programs

Storing Copy Programs

User-specified copy settings can be stored as copy programs.
Each of the 10 copy programs that are stored can be given a name.
Recall the copy programs by touching [Copy Program Recall] on the Utility screen.
1
Select the desired copy settings.
❍
For details, refer to the "Basic Copy Operations" on page 3-1.
2
Press the [Utility] key.
3
Touch [Store].
4
Touch [Mode Store].
5
Touch the key for the
number of the program
where you wish to store
the settings.
A screen appears,
allowing you to enter
the name of the
program.
❍
To delete a copy program
Touch [Delete] in the Mode Store screen, and then touch the number of the
program that you wish to delete. When the number of the program is
selected, the program is deleted.
❍
To check the specified settings for a program
Touch [Check] in the Mode Store screen, and then touch the number of the
program that you wish to check. The specified copy settings are displayed.
To display additional screens of settings, touch [Next] and [Previous]. To
return to the Mode Store screen, touch [Exit].
C350
10
10-5