Hole-Punching - Konica Minolta bizhub c350 User Manual

3.4 Selecting Output Settings

Hole-Punching

Holes for filing copies in binders can be punched. The position of the punched holes
can be specified along the left side or along the top of the paper.
However, the holes can be punched only if all of the following conditions are met.
G Finisher FS-601 is installed.
G Punch kit PK-501 is installed.
G If standard-size paper is used, the paper sizes must be A3 L and A4 C.
G
If non-standard-size paper is used, the paper width must be between 280 mm
and 297 mm.
G
If non-standard-size paper is used, the paper length must be between 182 mm
and 432 mm.
G Copies are printed only on plain paper.
G This machine must not be set to Interrupt mode.
G The "Image Adjustment" function on the Application screen is not used.
C350
3
3-11