Video Conversion - Yamaha RX-V3900 Owner's Manual

■ Pure Direct (Pure Direct)
Use this feature to select whether this unit outputs the
video signals when this unit is in the PURE DIRECT
mode.
Choice
Audio Does not output video signals.
Audio + Video Outputs video signals. For the better sound
quality, this unit only activates the limited video
features.
Note
You cannot use the GUI menu while this unit is in the PURE
DIRECT mode even if "Pure Direct" is set to "Audio + Video".
■ Channel Mute (Channel mute)
Use this feature to mute specific speaker channels.
Mode (Mode)
Use this feature to activate or deactivate the "Channel
Mute" setting for each speaker.
Choice
Disable Deactivates the "Channel Mute" function.
Enable Activates the "Channel Mute" function.
Each speaker settings
Select whether this unit mutes each speaker channel when
you set "Mode" to "Enable".
Channel Mute
Front L Front left
Front R Front right
Center Center
Surround L Surround left
Surround R Surround right
Surround Back L Surround back left
Surround Back R Surround back right
Front Presence L Front presence left speaker
Front Presence R Front presence right speaker
Subwoofer Subwoofer
Choice
Mute On Mutes the selected speaker channel.
Mute Off Does not mute the selected speaker channel.
Functions
Functions
Speaker channel
Functions
Graphical user interface (GUI) menu
Setup (Video)
Use this menu to adjust the video parameters.
y
You can reset the all parameters in "Video" to the initial factory
settings by using "VIDEO" of "INITIALIZE" in "ADVANCED
SETUP" (page 122).
■ Analog
Analog (Analog-to-analog

video conversion)

Use this feature to enable or disable the video conversion
among the analog video jacks (VIDEO, S VIDEO, and
COMPONENT VIDEO jacks).
Choice
Through Disables the video conversion among the analog
video jacks.
Conversion Enables the video conversion among the analog
video jacks.
Notes
• Analog-to-HDMI video conversion is always possible unless
video signals are being input at the HDMI input jacks or 1080p-
resolution analog video signals are being input.
• This unit does not convert 480 line video signals and 576 line
video signals interchangeably.
• 480p-, 576p-, 1080i- and 720p-resolution video signals cannot
be output at the S VIDEO and VIDEO MONITOR OUT jacks.
• The converted video signals are only output at the MONITOR
OUT jacks. When recording a video source, you must make the
same type of video connections between each component.
• When composite video or S-video signals from a VCR are
converted into component video signals, the picture quality may
suffer depending on your VCR.
• Unconventional signals input at the composite video or S-video
jacks cannot be converted or may be output abnormally. In such
cases, set "Analog Analog" to "Through".
■ Analog
HDMI (Analog-to-HDMI video
signal processing)
Use this feature to select whether this unit processes the
analog-to-HDMI video signals (input at VIDEO,
S VIDEO, or COMPONENT VIDEO input jacks and
output at HDMI OUT jacks).
Choice
Through Select this setting when you do not want this
unit to process the analog-to-HDMI video
signals.
Processing Select this setting when you want this unit to
apply the video processing configured in
"Processing" to the analog-to-HDMI video
signals.
Functions
Functions
93
En