Yamaha RX-V3900 Owner's Manual page 102

Graphical user interface (GUI) menu
■ I/O Assignment
(Input/output assignment)
Use this feature to assign the input/output jacks according
to the component to be used if the initial settings of this
unit do not correspond to your needs. Change the
parameter to reassign the respective jacks and effectively
connect more components.
Once the input/output jacks are reassigned, you can select
the corresponding component by using the CINPUT
selector (or the input selector buttons (3)).
Example: Assigning the CD DIGITAL INPUT
COAXIAL jack to "MD/CD-R".
1
Press 9ENTER to display the "I/O
Assignment" screen.
Coax
In
PHONO
CD
1
TV
MD/CD-R
BD/HD DVD
DVD
2
2
Press 9k / n /l / h to select the cell in row
"MD/CD-R", column "Coax In" and then
press 9ENTER.
3
Press 9l / h to select "1" and then press
9ENTER.
Select "None" to clear the existing assignment.
y
To return to the previous screen without change, press
9k.
4
Press 9k / n /l / h to select "EXIT" and
then press 9ENTER.
y
You cannot select a specific item more than once for the
same type of jack.
■ Input Rename (Input rename)
Use this feature to change the name of the input source
that appears in the GUI screen and in the front panel
display.
1
Press 9k / n /l / h to select a character or
function and then press 9ENTER to
confirm the selection.
Repeat step 1 until you input a name you want to use.
2
Press 9k / n /l / h to select "OK" and then
press 9ENTER.
98
En
Opt Opt Comp HDMI
In Out In In
EXIT
4
8
5 A IN 1
6 B IN 2
y
• To reset the name, select "RESET" and then press
9ENTER.
• To cancel the operation without change, select
"CANCEL" and then press 9ENTER.
■ Display Set (Display settings)
Front Panel Display (Front panel display setting)
Dimmer (Dimmer)
Use this feature to adjust the brightness of the front panel
display.
Control range: –4 to 0
Scroll (Front panel display message scroll)
Use this feature to set the front panel display message
scroll pattern.
Choice
Continue Continuous mode.
Select this to display the operation status in the
front panel display in a continuous manner.
Once Scroll-once mode.
Select this to display the operation status in the
front panel display by the first 14 alphanumeric
characters after scrolling all characters once.
Short Message (Short message display)
Use this feature to activate or deactivate the short message
display displayed in the GUI screen in the main zone.
Choice
On
Activates the short message display function.
Off Deactivates the short message display function.
Note
The short message display (except some status messages) does
not appear when the component video signals with 720p, 1080i
or 1080p resolutions are input.
Playback Screen (Playback screen display time)
Use this feature to set the playback screen display time.
Choice
Always Displays the menu unceasingly during an
operation.
10sec Turns off the menu 10 seconds after you
perform a certain operation.
30sec Turns off the menu 30 seconds after you
perform a certain operation.
y
This setting is applied to the GUI screen in the main zone and
OSD in Zone 2 or Zone 3.
Functions
Functions
Functions