Dell SD630-S Owner's Manual page 137

e. Internal dual SD module
f. All expansion card risers
g. Heat sinks or heat sink blanks and processors or processor blanks
h. Memory modules and memory module blanks
i. Network daughter card
j. Cooling fan assembly
k. Cooling shroud
l. Power supply units
3. Reconnect all cables to the system board.
NOTE: Ensure that the cables inside the system are routed along the chassis wall and secured
by using the cable securing bracket.
4. Follow the procedure listed in the After working inside your system section.
5. Import your new or existing iDRAC Enterprise license. For more information, see the Integrated Dell
Remote Access Controller User's Guide at Dell.com/idracmanuals.
6. Ensure that you:
a. Use the Easy Restore feature to restore the Service Tag. For more information, see the
Restoring the Service Tag by using the Easy Restore feature section.
b. If the Service Tag is not backed up in the backup flash device, enter the system service tag
manually. For more information, see the Entering the system service tag section.
c. Update the BIOS and iDRAC versions.
d. Re-enable the Trusted Platform Module (TPM). For more information, see the Re-enabling the
TPM for BitLocker users or Re-enabling the TPM for Intel TXT users section.
Related Links
Installing the Trusted Platform Module
After working inside your system
Restoring the Service Tag by using the Easy Restore feature
Entering the system Service Tag by using System Setup
Initializing the TPM for BitLocker users
Initializing the TPM for TXT users
Entering the system Service Tag by using System Setup
If Easy Restore fails to restore the Service Tag, use System Setup to enter the Service Tag.
1. Turn on the system.
2. Press F2 to enter System Setup.
3. Click Service Tag Settings.
4. Enter the Service Tag.
NOTE: You can enter the Service Tag only when the Service Tag field is empty. Ensure that you
enter the correct Service Tag. After the Service Tag is entered, it cannot be updated or changed.
5. Click Ok.
6. Import your new or existing iDRAC Enterprise license.
For more information, see the Integrated Dell Remote Access Controller User's Guide at Dell.com/
idracmanuals.
Restoring the Service Tag by using the Easy Restore feature
The Easy Restore feature enables you to restore your system's Service Tag, license, UEFI configuration,
and the system configuration data after replacing the system board. All data is automatically backed up in
137