Table of Contents
Advertisement
Miscellaneous Settings
You can use the Miscellaneous Settings screen to perform specific functions such as updating the asset
tag and changing the system date and time.
Related Links
Miscellaneous Settings details
System BIOS
Viewing Miscellaneous Settings
Viewing Miscellaneous Settings
To view the Miscellaneous Settings screen, perform the following steps:
1.
Turn on, or restart your system.
2.
Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to finish
booting, and then restart your system and try again.
3.
On the System Setup Main Menu screen, click System BIOS.
4.
On the System BIOS screen, click Miscellaneous Settings.
Related Links
Miscellaneous Settings
Miscellaneous Settings details
Miscellaneous Settings details
The Miscellaneous Settings screen details are explained as follows:
Option
Description
System Time
Enables you to set the time on the system.
System Date
Enables you to set the date on the system.
Asset Tag
Specifies the asset tag and enables you to modify it for security and tracking
purposes.
Keyboard
Enables you to set whether the system boots with the NumLock enabled or
NumLock
disabled. This option is set to On by default.
F1/F2 Prompt on
Enables or disables the F1/F2 prompt on error. This option is set to Enabled by
Error
default. The F1/F2 prompt also includes keyboard errors.
Load Legacy
Enables you to determine whether the system BIOS loads the legacy video (INT
Video Option
10H) option ROM from the video controller. Selecting Enabled in the operating
ROM
system does not support UEFI video output standards. This field is available only for
UEFI boot mode. You cannot set the option to Enabled if UEFI Secure Boot mode
is enabled.
Related Links
Miscellaneous Settings
Viewing Miscellaneous Settings
60
NOTE: This option does not apply to 84-key keyboards.
Advertisement
Table of Contents
Troubleshooting
