Diving With The Zoop; Before Diving; Activation And Prechecks - Suunto ZOOP User Manual

3.

DIVING WITH THE ZOOP

This section contains instructions on how to operate
the dive computer and interpret its displays. You will
find that this dive computer is easy to use and read.
Each display shows only the data relevant to that
specific diving situation.
3.1.

BEFORE DIVING

3.1.1.

Activation and Prechecks

The dive computer will activate if submerged deeper
than 0.5 m (1.5 ft). However, it is necessary to turn
on the Dive Mode before diving to check the altitude
and personal adjustment settings, battery condition,
oxygen settings etc. Press the SMART (Mode) button
to activate the instrument.
After activation all display elements will turn on sho-
wing mostly figure 8's and graphical elements (Fig.
3.1.). A few seconds later the battery power indicator
is shown and the buzzer is activated (Fig. 3.2. display
a, b, c or d depending on the battery voltage). If set to
Air mode the screen will enter the Surface mode (Fig.
3.3.) and if set to Nitrox mode the essential oxygen
parameters are shown with the text NITROX (Fig.
3.20.) before the Surface mode.
°
C
Fig. 3.1. Startup I. All seg-
ments shown.
OK
QUIT
Fig. 3.2. Startup II. Battery
power indicator.
15