Press the SMART (MODE) button
•
To activate the dive computer.
•
To change from the Surface Mode to the
menu based modes.
•
To select, confirm or quit a submode (short
press).
•
To immediately exit any submode to the
Surface Mode (long press).
Press the arrow up scroll (PLAN) button
•
To activate the timekeeping display, if the
display is blank.
•
To activate the Dive Planning in the Surface
Mode.
•
To make a special bookmark in the profile
memory during a dive.
•
To scroll up the options (, increase).
Press the arrow down scroll (ALTER) button
•
To activate the timekeeping display, if the
display is blank.
•
To activate the alternative display(s).
•
To scroll down the options (, decrease).
The dive computer is controlled with the SMART
(MODE/On/Select/OK/Quit) and the PLAN and
TIME push buttons and with the water contacts
as follows:
Activation
Dive
Planning
Menu Modes
press the SMART (On) button
or immerse the instrument
in water for five (5) seconds.
in the Surface Mode, press the
PLAN (s) button.
press the SMART (MODE)
button.
13