Suunto ZOOP User Manual page 45

The following data is transferred to the PC:
•
depth profile of the dive
•
dive time
•
surface interval time
•
dive number
•
Altitude and Personal adjustment settings
•
oxygen percentage setting and maximum OLF
(in NITROX Mode)
•
tissue calculation data
•
temperature at the maximum depth, beginning
of the dive, and end of the dive
•
dive entry time (year, month, day and time)
•
additional dive information (e.g. SLOW
and Mandatory Safety Stop violations, Dive
Attention Mark, Bookmark, Surfaced Mark,
Decompression Mark, Ceiling Error Mark)
•
identity number of the dive computer
•
personal information.
It is also possible to manually add comments and
other personal information to the PC based dive data
files. The PC-Interface package comes complete with
the interface unit, the software, and an instruction and
getting started guide.
NOTE! While in the Data Transfer Mode, the con-
nector/water contacts are used only for the data trans-
fer. The Dive Mode IS NOT automatically activated
if the contacts are submerged.
After you have finished the data transfer, press the
SMART (Quit) to exit Data Transfer Mode [PC-SET].
If no button is operated or no data is transferred
within 5 minutes, the instrument beeps and returns
to the timekeeping display automatically.
SELECT
Fig. 4.14. Data Transfer
mode. [3 PC SET].
43