Suunto ZOOP User Manual page 43

Press the SMART (Select) button once to change the
scroll buttons to scroll the different dives forward and
backward (Fig. 4.10.). Press the SMART (>Select)
button again to change function of the scroll buttons
back to scroll the different pages of the selected dive.
When searching the dives, only the page 1 is shown.
The END text is displayed between the oldest and
the most recent dive (Fig. 4.11.).
The memory will retain approximately the last 50
hours of dive time. After that, when new dives are
added, the oldest dives are deleted. The contents of
the memory will remain when the battery is changed
(assuming that the replacement has been done ac-
cording to the instructions).
DIVE PROFILE MEMORY [PROF]
The scrolling of the profile will start automatically
when the Logbook page IV (PROF) is entered.
With the default setting, the dive profile is recorded
and displayed in 30-second increments with each dis-
play being shown for about three seconds. The depths
shown are the maximum values of each interval.
Pressing any button stops the scrolling of the pro-
file.
NOTE! Several repetitive dives are considered to
belong to the same repetitive dive series if the no-
flying time has not ended.
See "Dive Numbering" in section 3.5.2. for further
information.
DIVE
SELECT
TIME
Fig. 4.10. Logbook, page I.
Press SMART (Select) but-
ton once to be able to scroll
between different dives.
QUIT
Fig. 4.11. Logbook, end of
the memory. END text is
displayed between oldest
and the most recent dive.
41