To Undo An Option Update; Important Notes About Sd Cards - Ricoh D129 Service Manual

11. Remove the option SD card from Slot 2 (Lower Slot).
12. Turn the copier on.
13. Go into the User Tools mode and confirm that update was successful.
14. User Tools> System Settings> Administrator Tools> Firmware Version> Next
15. Turn the copier off again, then reattach the cover.
16. Return the copied SD card to the customer for safekeeping, or tape it to the faceplate of the
controller.

To undo an option update

1. Turn the main switch off.
2. Confirm that the Printer Unit SD card is in SD card Slot 1 (Upper Slot).
3. Put the original option SD card (Scanner Enhance Option) in SD card Slot 2 (Lower Slot).
4. Turn the main switch on.
5. Go into the SP mode and do SP5873-002 (Undo Exec).
6. Follow the messages on the operation panel to complete the procedure.
7. Turn the main switch off.
8. Remove the option SD card from Slot 2 (Lower Slot).
9. Turn the main switch on.
10. Go into the User Tools mode and confirm that undo was successful.
User Tools> System Settings> Administrator Tools> Firmware Version> Next
11. Turn the copier off again, then reattach the cover.

Important Notes about SD Cards

Here are some basic rules about merging applications on SD cards.

The data necessary for authentication is transferred with the application program to the target
SD card.

The SD card is the only evidence that the customer is licensed to use the application program.
The service technician may occasionally need to check the SD card and its data to solve
problems. SD cards must be stored in a safe location at the work site.

Once the merge is completed, the SD card from which the application was copied cannot be
used again, but the customer must keep the card to serve as proof of purchase.

An SD card from which an application has been moved to another SD card can be restored to
full operation with SP5873-002 (Undo).

Before storing the card from which an application has been copied, label it carefully so that
you can identify it easily if you need to do the undo procedure later.
SM
Printer and P/S Options (Basic Models)
13 D641