Dns Server; Network Administrator; Pop3 Server - Oki c3530 User Manual

7.
8.
9.
Scan to E-mail
Downloaded From ManualsPrinter.com Manuals

DNS server:

NOTE:
DNS: (Domain Name System). The DNS server identifies
hosts via names instead of IP addresses. If the DNS server is
available on your network, you can enter the domain name
instead of digits for your SMTP or POP3 servers, such as
Pegasus.com.tw instead of 120.3.2.23
This is the IP address of DNS Server assigned by your

network administrator.

POP3 Server:

The IP address of your POP3 server.
POP3 Port
The port number of your POP3 Server.
Enter the DNS name, or IP and port number of your POP3
server if your mail server requires POP3 authentication,
before sending e-mails from the machine.
NOTE:
POP3: Post Office Protocol3 is a service that stores and serves
e-mails for various client machines that are not connected to
the Internet 24 hours a day. E-mails are held in POP3 until
you log on.
The MFP allows you to deliver your scanned document to
e-mail addresses on the network. The document is first
scanned and converted to a standard PDF, JPEG, TIFF, or
MTIF (Multi-page TIFF) file format and then transmitted to
remote recipients simultaneously as an e-mail attachment.
When you send an e-mail to someone using this MFP it
uses Simple Mail Transfer Protocol (SMTP) to transfer your
outgoing e-mails to your SMTP mail server, and then send
these e-mails to your recipients via the internet.
C3530 MFP User's Guide
Configuring your machine > 42