Oki c3530 User Manual page 63

2.
3.
4.
Downloaded From ManualsPrinter.com Manuals
Move the cursor to the Number field and press the
Enter key.
Using the Down key, move the cursor to Select no
and press the Enter key.
Use the Ten Key pad to enter a two-digit Email
Address no. or Group Address no. after the "#"
or "*" and press the Enter key.
As above, select Continue to enter a new address.
When you have finished entering all your email
addresses, select Done instead of Continue. The
screen will ask you to Confirm your selection.
(d) Selecting address from a Network
Selecting from a Network allows you to search Email
Addresses from a Lightweight Directory Access
Protocol (LDAP) Server.
Move the cursor to the LDAP field and press the
Enter key.
Enter the information required
Select the Subject field
(a) From the Email screen, select Subject.
(b) Select Subject list to select from a previously
entered selection of subjects.
(c) Select Screen Entry to enter a new subject.
Give your document a File name.
(a) Select File name and enter the information using
the Ten Key pad.
Define the Density
(a) Select Density and select from -3 to +3. Normally
this will be 0 unless the copy documents are either
C3530 MFP User's Guide
Operation > 63