DiagnosticTool
TheDiagnosticUtilityisatoolboxthatletsusersexploretheprinter'ssettingsandstatus;changepri
ntersettings;downloadgraphics,fonts,andfirmware;createprinterbitmapfonts;andtosendadditi
onalcommandstotheprinter.Usingthisconvenienttool,youcanexploretheprinterstatusandsetti
ngsandtroubleshoottheprinter.
Start the Diagnostic Tool
1. Tostartthesoftware,doubleclicktheDiagnostictoolicon.
Note:ThediagnostictoolislocatedatD:\DiagTool.
2. Select the PC interface connected with bar code printer.
Default setting is USB interface. No further setting is required.
If RS-232 port is selected, further setup is required to select the serial port, baud rate, parity
check, data bits, stop bit and flow control.
If Ethernet is selected, need to select the bar code printer.
BPP12UserManual
20