Commissioning, Inspection, Maintenance; Steps - Commissioning, Inspection And Maintenance - Viessmann VITOROND 200 Service Instructions Manual

Steps - commissioning, inspection and maintenance

For further information regarding the individual steps, see the page indicated
• •
•
•
•
•
• •
•
•
• •
• •
• •
•
•
• •
• •
•
•
• •
• •
• •
Commissioning steps
Inspection steps
Maintenance steps
1. Commissioning the system...........................................
2. Shutting down the system
3. Opening the boiler door and cleaning cover............... 10
4. Removing and cleaning the turbulators (only up to
195 kW)............................................................................ 11
5. Cleaning the heating surface, flue outlet and flue....... 12
6. Checking all gaskets and packing cords on the flue
gas side
7. Checking the thermal insulation parts of the boiler
door
8. Inserting the turbulators, fitting the boiler door and
cleaning cover................................................................. 12
9. Checking all connections and the sensor well on the
heating water side for leaks
10. Checking the function of the safety equipment
11. Checking the expansion vessel and system pressure 14
12. Checking electrical plug-in connections and cable
entries for firm seating
13. Checking the thermal insulation
14. Checking the water quality............................................ 14
15. Cleaning the sight glass in the boiler door.................. 16
16. Checking the mixer for ease of operation and
tightness.......................................................................... 16
17. Checking the function of the return temperature
raising facility (if installed)
18. Checking the installation room ventilation
19. Checking the flue for tightness
20. Checking the draught stabiliser (if installed)............... 16

Commissioning, inspection, maintenance

Page
9
7