Figure 24 Add an IP address group
# Add a portal device.
Select User Access Manager > Portal Service Management > Device from the navigation tree to enter the
portal device configuration page. Then, click Add to enter the page for adding a portal device, as
shown in
Figure
25.
Enter the device name NAS.
a.
Enter the IP address of the access interface on the router, which is 192.168.1.70.
b.
Enter the key, which is portal, the same as that configured on the router.
c.
Set whether to enable IP address reallocation. Because direct portal authentication is used in
d.
this example, select No from the Reallocate IP drop-down list.
Click OK to finish the operation.
e.
Figure 25 Add a portal device
67