Configuring Ip Address-Supported Url Address Filtering; Configuring Url Parameter Filtering - HP A6600 Configuration Manual

Configuring IP address-supported URL address filtering

To do...
1. Enter system view.
2. Enable the URL address
filtering function.
3. Configure IP address-
supported URL address
filtering.
4. Specify an ACL for URL
address filtering.
5. Display information about URL
address filtering.
NOTE:
The source IP addresses specified in the ACL for URL address filtering must be the IP addresses of the
websites allowed to be accessed by using their IP addresses.

Configuring URL parameter filtering

To do...
1. Enter system view.
2. Enable the URL parameter
filtering function.
3. Add a URL parameter filtering
entry.
4. Display information about
URL parameter filtering.
Command...
system-view
firewall http url-filter host enable
firewall http url-filter host ip-
address { deny | permit }
firewall http url-filter host acl acl-
number
display firewall http url-filter host [
all | item keywords | verbose ] [
| { begin | exclude | include }
regular-expression ]
Command...
system-view
firewall http url-filter parameter
enable
firewall http url-filter parameter {
default | keywords keywords }
display firewall http url-filter
parameter [ all | item keywords |
verbose ] [ | { begin | exclude |
include } regular-expression ]
377
Remarks
—
Required.
Disabled by default.
Required.
Deny by default.
Optional.
By default, no ACL is specified for
URL address filtering.
Optional.
Remarks
—
Required
Disabled by default
Required
Optional