HP A6600 Configuration Manual page 169

Figure 64 Add an IP address group
# Add a portal device.
Select User Access Manager > Portal Service Management > Device from the navigation tree to enter the
portal device configuration page. Then, click Add to enter the page for adding a portal device, as
shown in Figure 65.
Enter the device name NAS.
a.
Enter the IP address, which is the virtual IP address of the VRRP group that holds the portal-
b.
enabled interface.
Enter the key, which must be the same as that configured on the routers.
c.
Set whether to enable IP address reallocation. Because direct portal authentication is used in
d.
this example, select No from the Reallocate IP drop-down list.
Select No for both Support Server Heartbeat and Support User Heartbeat.
e.
Figure 65 Add a portal device
# Associate the portal device with the IP address group.
As shown in Figure 66, on the device list, click the icon in the Port Group Information Management
column of device NAS to enter the port group configuration page.
157