HP A6600 Configuration Manual page 65

Figure 12 Add a user for device management
Configure the router.
2.
# Configure the IP address of interface GigabitEthernet 1/0/1, through which the Telnet user accesses
the router.
<Router> system-view
[Router] interface gigabitethernet 1/0/1
[Router-GigabitEthernet1/0/1] ip address 192.168.1.70 255.255.255.0
[Router-GigabitEthernet1/0/1] quit
# Configure the IP address of interface GigabitEthernet 1/0/2, through which the router communicates
with the server.
[Router] interface gigabitethernet 1/0/2
[Router-GigabitEthernet1/0/2] ip address 10.1.1.2 255.255.255.0
[Router-GigabitEthernet1/0/2] quit
# Enable the Telnet server on the router.
[Router] telnet server enable
# Configure the router to use AAA for Telnet users.
[Router] user-interface vty 0 4
[Router-ui-vty0-4] authentication-mode scheme
[Router-ui-vty0-4] quit
# Create RADIUS scheme rad.
[Router] radius scheme rad
# Specify the primary authentication server.
53