Figure 69 Portal server configuration
# Configure an IP address group.
Select User Access Manager > Portal Service Management > IP Group from the navigation tree to enter
the portal IP address group configuration page. Then, click Add to enter the page for adding an IP
address group, as shown in
Enter the IP group name.
a.
Enter the start IP address and end IP address of the IP address group. Make sure that the IP
b.
address of the user host is within this IP address group.
Select a service group. By default, the group Ungrouped is used.
c.
Select the IP group type as Normal.
d.
Figure 70 Add an IP address group
Figure
70.
165