Displaying And Maintaining Mac Authentication; Mac Authentication Configuration Examples; Local Mac Authentication Configuration Example - HP A6600 Configuration Manual

Displaying and maintaining MAC authentication

To do...
Display MAC authentication
information
Clear MAC authentication
statistics

MAC authentication configuration examples

Local MAC authentication configuration example

Network requirements
In the network in
Internet access. Make sure of the following:
All users belong to domain aabbcc.net.
•
Local users use their MAC address as the username and password for MAC authentication. The
•
MAC addresses are separated by hyphens and in lower case.
The access device detects whether a user has gone offline every 180 seconds. When a user fails
•
authentication, the device does not authenticate the user within 180 seconds.
Figure 40 Local MAC authentication
Configuration procedure
Configure local MAC authentication
1.
# Add a local user account, set both the username and password to 00-e0-fc-12-34-56, the MAC
address of the user host, and enable LAN access service for the account.
<Router> system-view
[Router] local-user 00-e0-fc-12-34-56
[Router-luser-00-e0-fc-12-34-56] password simple 00-e0-fc-12-34-56
[Router-luser-00-e0-fc-12-34-56] service-type lan-access
[Router-luser-00-e0-fc-12-34-56] quit
# Configure ISP domain aabbcc.net to perform local authentication for LAN access users.
[Router] domain aabbcc.net
[Router-isp-aabbcc.net] authentication lan-access local
[Router-isp-aabbcc.net] quit
Command...
display mac-authentication [
interface interface-list ] [ | { begin
| exclude | include } regular-
expression ]
reset mac-authentication statistics
[ interface interface-list ]
Figure 40, perform local MAC authentication on port GigabitEthernet 1/0/1 to control
Remarks
Available in any view
Available in user view
108