Configuring The Router To Act As Public Key Authentication Server - HP A6600 Configuration Manual

Figure 106 SSH client configuration interface
In the window shown in
are prompted to enter the username and password. After entering the username (client001) and
password (aabbcc), enter the configuration interface of the server.

Configuring the router to act as public key authentication server

Network requirements
As shown in
through Ethernet interfaces. Configure an SSH user on the router so that the host can securely log in to
the router after passing publickey authentication. Use the RSA public key algorithm.
Figure 107 Router acts as server for publickey authentication
During SSH server configuration, the client public key is required. Use the client software to generate
RSA key pairs on the client before configuring the SSH server.
Figure 106, click Open to connect to the server. If the connection is normal, you
Figure 107, a host (the SSH client) and a router (the SSH server) are directly connected
318