HP A6600 Configuration Manual page 125

Configure RADIUS-based MAC authentication on the device
2.
# Configure a RADIUS scheme.
[Sysname] radius scheme 2000
[Sysname-radius-2000] primary authentication 10.1.1.1 1812
[Sysname-radius-2000] primary accounting 10.1.1.2 1813
[Sysname-radius-2000] key authentication abc
[Sysname-radius-2000] key accounting abc
[Sysname-radius-2000] user-name-format without-domain
[Sysname-radius-2000] quit
# Apply the RADIUS scheme to an ISP domain for authentication, authorization, and accounting.
[Sysname] domain 2000
[Sysname-isp-2000] authentication default radius-scheme 2000
[Sysname-isp-2000] authorization default radius-scheme 2000
[Sysname-isp-2000] accounting default radius-scheme 2000
[Sysname-isp-2000] quit
# Enable MAC authentication globally.
[Sysname] mac-authentication
# Specify the ISP domain for MAC authentication.
[Sysname] mac-authentication domain 2000
# Configure the device to use MAC-based user accounts, and the MAC addresses are separated by
hyphens and in lowercase.
[Sysname] mac-authentication user-name-format mac-address with-hyphen lowercase
# Enable MAC authentication for port GigabitEthernet 1/0/1.
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] mac-authentication
Configure the RADIUS servers.
3.
# Add a user account with 00-e0-fc-12-34-56 as both the username and password on the RADIUS
server, and specify ACL 3000 as the authorization ACL for the user account. (Omitted)
Verify the configuration.
4.
After the host passes authentication, perform display connection on the device to view online user
information.
[Sysname-GigabitEthernet1/0/1] display connection
Index=9 , Username=00-e0-fc-12-34-56@2000
IP=N/A
IPv6=N/A
MAC=00e0-fc12-3456
Total 1 connection(s) matched
113