Preparing The Computer - Compaq Presario 2510 Maintenance & Service Manual

Home | Preface
Jumpers & Switches

Preparing the Computer

Configuration
and
Diagnostics
Preparing the
Computer
Computer
Setup
Compaq
Utilities
Diskette
Running
Compaq
Utilities
Computer
Check Up
(TEST)
INSPECT
Maintenance & Service Guide
Presario 2250 Series
2510, 2410 ES & 4240 ES Personal Computers
| Product Description
Removal & Replacement
| Specifications
If you encounter an error condition, complete the following steps
before starting problem isolation procedures:
1.Ensure proper ventilation. The computer should have a 3-inch (7.6-
cm) clearance
at the back of the system unit.
2.Turn off the computer and peripheral devices.
3.Disconnect any peripheral devices other than the monitor and
keyboard. Do not disconnect the printer if you want to test it or use it to
log error messages.
4.Install loop-back and terminating plugs for complete testing.
| Troubleshooting
| Connector Pins
CAUTION:Make sure the power is off
before disconnecting or reconnecting
the mouse, keyboard, or any other
peripheral devices. Disconnecting or
connecting peripheral devices while
the unit power is on can damage the
system board.
| Illustrated Parts
| Power Cord Requirements
|