Preparing For Disassembly - Compaq Presario 2510 Maintenance & Service Manual

Home | Preface
Jumpers & Switches

Preparing for Disassembly

To prepare the computer for the removal and replacement
ESD
procedures, complete the following steps:
Service
Cable
Positions
Preparing for
Disassembly
Removal &
Replacement
Procedures
IMPORTANT:
Maintenance & Service Guide
Presario 2250 Series
2510, 2410 ES & 4240 ES Personal Computers
| Product Description
| Specifications
Remove any diskette, compact disc (CD), or Digital Versatile
1.
Disk (DVD) from
the computer.
Turn off the computer and any peripheral devices that are
2.
connected to the computer.
CAUTION: The computer power switch should be turned
off before you disconnect any cables.
Disconnect the power cord from the electrical outlet, then
3.
from the computer.
Disconnect all peripheral device cables from the computer.
4.
During disassembly, label each cable as you
remove it. Be sure to note the position and routing
of each cable before removal.
| Troubleshooting
& Replacement
| Connector Pins
| Illustrated Parts
| Power Cord Requirements
| Removal