Service Considerations; Tool Requirements - Compaq Presario 2510 Maintenance & Service Manual

Home | Preface
Jumpers & Switches

Service Considerations

Listed below are some of the considerations that should be kept
ESD
in mind during the disassembly and assembly of the computer.
Service

Tool Requirements

Cable
Positions
Preparing
for
Disassembly
Screws
The screws used in these products are not interchangeable. If an
incorrect screw is used during the reassembly process, it could
cause damage to the unit. Compaq strongly recommends that all
screws removed during the disassembly process be kept with the
part that was removed, then returned to their proper locations.
IMPORTANT:
Maintenance & Service Guide
Presario 2250 Series
2510, 2410 ES & 4240 ES Personal Computers
| Product Description
| Specifications
Torx T-8, T-10, and T-15 screwdrivers (included in kit
number 130619-001)
Needle-nose pliers
Phillips screwdriver (An 8-inch Phillips screwdriver may be
necessary for some procedures.)
Flat-bladed screwdriver
Diagnostics software
ROM removal tool
As each subassembly is removed from the
computer, it should be placed away from the work
area to prevent damage.
| Troubleshooting
& Replacement
| Connector Pins
| Illustrated Parts
| Power Cord Requirements
| Removal