Compaq Presario 2510 Maintenance & Service Manual page 44

Home | Preface
Jumpers & Switches
Removal and Replacement
Removing the Left Speaker
Removing the Left Speaker
Maintenance & Service Guide
Presario 2250 Series
2510, 2410 ES & 4240 ES Personal Computers
| Product Description
Removal & Replacement
| Specifications
| Troubleshooting
| Connector Pins
| Illustrated Parts
| Power Cord Requirements
Perform the
1.
preparation
procedures.
Remove the hood.
2.
Move the air baffle
3.
out of the way.
Remove the drive
4.
cage from the
chassis.
Remove the front
5.
bezel.
Disconnect the
6.
speaker cables from
the system board.
Remove the four
7.
screws from the rear
of the right speaker
and separate the
speaker from the
chassis.
8. Remove the three
screws from the left
speaker and separate
the speaker from the
chassis.
End of sequence. To
replace the speakers,
reverse this procedure.
|