Responding To An Attention Indicator Flashes - Kyocera FS-C2026MFP Operation Manual

Responding to an ATTENTION Indicator Flashes

If an ATTENTION indicator flashes, press [Status/Job Cancel] to check an error message. If the message is not
indicated on the Message Display when [Status/Job Cancel] is pressed or the ATTENTION indicator flashes,
check the following.
Symptom
Cannot send fax.
Downloaded From ManualsPrinter.com Manuals
Checkpoints
Is the modular cord
connected correctly?
Is Permitted FAX No. or
Permitted ID No.
registered correctly?
Has a communication
error occurred?
Is the destination FAX
line busy?
Does the destination
FAX machine respond?
Is there an error other
than above?
10-15
Corrective Actions
Connect the modular
cord correctly.
Check Permitted FAX
No. and Permitted ID
No..
Check error codes in the
TX/RX Result Report
and Activity Report. If
the error code starts with
"U" or "E", perform the
corresponding
procedure.
Send again.
Send again.
Contact your Service
Representative.
Troubleshooting
Reference Page
—
FAX Operation Guide
Chapter 6 Transmission
Restriction
FAX Operation Guide
Appendix
"Error Code List"
—
—
—
10