Specifying Destination - Kyocera FS-C2026MFP Operation Manual

Specifying Destination

When specifying destination, choose from the Address Book or use the One-touch keys.
Part that is operated
Choosing from the Address Book
Select a destination registered in the Address Book.
Downloaded From ManualsPrinter.com Manuals
Select Addr Book: a b
t Address Book
*********************
t Ext Address Book
[ Exit
Address Book:
k Design
*********************
l Fiala
l Maury
[ Menu
l Fiala:
b 0667643277
*********************
p fiala@kyoceramita.N
SMB-PC
[ Menu
Place the original on the platen or in the document
3
processor, and press the Start key. Transmission
starts.
In the basic screen for sending, press the Address
1
Book key. The Select Addr Book menu appears.
If external address book is not registered,
NOTE:
[Ext Address Book] is not displayed.
]
Press the
2
a b
then press the OK key. Address Book appears.
To use an address book on the LDAP server, select
[Ext Address Book].
]
3 Press the
group, and then press the OK key.
If you select a user, the list of destinations
a b
registered to the user appears.
If you select a group, proceed to step 5.
]
3-44
Basic Operation
or key to select [Address Book] and
or key to select the desired user or