One-Touch Keys And Program Keys - Kyocera FS-C2026MFP Operation Manual

One-Touch Keys and Program Keys

The one-touch keys and program keys on the operation panel are described below.
One-Touch Key
Register destinations to one-touch keys, and you can enter the desired destination by pressing the applicable
one-touch key. For registering a destination to a one-touch key, refer to Adding a Destination on One-touch
Key on page 8-145.
Entering Destination with One-touch Key
Program Keys
Settings of various functions frequently used for copying and sending can be collectively registered as a
program. Then, you can change the current settings of various functions to the registered settings by just
pressing the applicable program key.
The following functions are already registered in Program 1 key. This function allows you to copy the
NOTE:
front and back sides of ID card or other document that is smaller than Statement or A5 size onto a single page.
Although the functions are deleted by overwriting Program 1 key, you can register the same settings using the
Function Menu key.
Zoom Options: Auto Zoom
Combine: 2 in 1
Continuous Scan: On
Original Size: Statement/A5
Paper Selection: Cassette 1
Downloaded From ManualsPrinter.com Manuals
Address Entry:
*
ABC
[ Text
Ready to send.
Dest.:
p :sally@kyoceramitaN
1-sided 300x300dpi
[ Duplex ] [ScanRes.]
1 In Address Entry, press the one-touch key where
B b
the desired destination is registered.
Recalling from One-touch Keys 1 to 11
Press the one-touch key where the destination is
]
registered.
Recalling from One-touch Keys 12 to 22
Press the Shift Lock key to turn on the indicator
next to the keys, and then press the one-touch
key where the destination is registered.
2 Complete. appears, and the stored address is
retrieved.
1
Any destination already entered is
IMPORTANT:
overwritten.
3-3
Basic Operation
3