Kyocera FS-C2026MFP Operation Manual page 440

Error Message
File is not found.
Top tray is full of
Paper.
Remove the paper.
Unknown toner
Installed.
Unknown toner
Installed. PC
Insufficient memory.
Cannot start the job
Replace MK.
Send error.
####
Error Code:1101
Downloaded From ManualsPrinter.com Manuals
Checkpoints
–
–
–
–
–
–
–
Scan to SMB Error Code
Is the host name of the SMB
server incorrect?
Corrective Actions
The specified file is not found. The
job is canceled. Press the OK key.
Remove paper from the top tray, and
press the OK key to resume the job.
If the toner container was taken from
a different machine of the same
model while it was displaying the Add
toner. message, ignore the message
and use the toner.
This message is displayed if the
installed toner container's regional
specification does not match the
machine's.
Further scanning cannot be
performed due to insufficient memory.
Press the OK key to print the
scanned pages. Press the Status/
Job Cancel key and press [Cancel]
to cancel the job.
Replacement of the parts in the
maintenance kit is necessary at every
200,000 pages of printing and
requires professional servicing.
Contact your service technician.
An error has occurred during
transmission. The possible error
codes and their descriptions are as
follows.
Set the correct host name in
COMMAND CENTER.
10-10
Troubleshooting
Reference
Page
—
—
—
—
—
—
—