Table of Contents
Advertisement
Multi-Station Transmission (Broadcasting)
You can store the document(s) into memory and then send to multiple stations (up to 270 addresses) via LAN.
1
You can temporarily change the transmission settings.
2
Enter email addresses by any combination of the following
methods:
• One-Touch Dialing
• Abbreviated Dialing
• Directory Search Dialing, press
email address is entered.
• Manual Number Dialing, press
station is entered (up to 70 addresses).
01
Ex:
ABBR
If you want to confirm the number of stations you have
entered, press
3
START
The document(s) is stored into memory with a file number.
Then starts sending the email message.
(see Note 1) (see Note 2) (see Note 3)
Note:
1. If your machine sounds an alarm (pi-pi-pi) at Step 2, this indicates that the Dialer is Full (more than 70 full email
addresses are entered or 70 transmission reservations including G3 communication have been already reserved).
2. If the transmission can not be completed for any reason, the email may be returned undelivered, otherwise no reply
will be printed.
3. The unit will accept a combination of email addresses and PSTN dialing numbers.
Sending Documents via LAN
Set document(s) face down.
SET
SET
1
0
0
.
SET
ENTER STATION(S)
THEN PRESS START 00%
after each
after each
<01>(Station name)
abc@panasonic.com
[100](Station name)
xyz@panasonic.com
2 STN(S) ARE SET
ADD MORE OR START
* STORE *
* STORE * COMPLETED
TOTAL PAGE=005
ON LINE * MEM.XMT *
ID:abc@panasonic.com
NO.001
PAGES=001
01%
25%
87
4
Advertisement
Table of Contents
