Connecting The Telephone Line Cables And Power Cord - Panasonic Panafax DX-2000 User Manual

Connecting the Telephone Line Cables and Power Cord

Ethernet-Token-Ring
Bridge
(Optional Order
No. UE-204006)
10Base-T Ethernet Hub
Power Cord
Plug one end of the power cord into an ordinary 3 prong AC outlet and the other end into the receptacle on the
rear of the machine.
Warning : This apparatus must be properly grounded through an ordinary 3 prong AC outlet.
Do not break off the earth (ground) prong to fit a 2 prong outlet.
(see Note 1)
Telephone Line Cable
Plug one end of the telephone line cable into the "RJ-11C" telephone jack supplied by the telephone company
and the other end into the LINE jack on the left side of the machine.
RJ-11C Telephone Jack
Note: 1. Your machine uses little power and you should keep it ON at all times.
32
Ethernet LAN (10Base-T) Cable (Not included)
Power Cord (Included)
Telephone Line Cable (Included)