Access Code; Setting The Access Code - Panasonic Panafax DX-2000 User Manual

Access Code

The Access Code prevents an unauthorized user from operating the machine. Once a 4-digit Access Code is
registered, no one can operate the machine without entering the correct access code.
Automatic Receiving, however, is always available. After you complete any operation, such as mode setting or
transmission, and the display returns to standby, you have to re-enter the access code in order to use the machine
again. Registering the Access Code does not affect the use of the machine in any other way.

Setting the Access Code

1
FUNCTION
2
4
3
3
4
Enter a 4-digit Access Code.
Ex:
5
SET
6
Select Restriction Level.
1
1
or
2
2
Ex:
7
SET
(see Note 1)
1. To erase the Access Code, enter the Access Code and press
Note:
then press
146
7
SET
8 SET
1 2 3 4
for All Operations.
for Setting and Printing the User Parameters and
Fax Parameters only.
2
STOP
CLEAR SET
and
SET
STOP
.
SET MODE (1-6)
ENTER NO. OR
FAX PARAMETER(1-164)
NO.=
38 ACCESS CODE
38 ACCESS CODE
1234
38 ACCESS CODE
1:ALL 1234
38 ACCESS CODE
2:PARAMETERS 1234
and follow the procedure above to step 3,