Table of Contents
Advertisement
User Parameters
Setting Your LOGO
When you send a document, your LOGO appears on the top of the copy printed out at the other station.
The LOGO helps to identify you to someone who receives your document.
1
FUNCTION
2
1
3
SET
4
Enter your LOGO (max. 25 characters and digits) by using
the Character keys (see page 12).
Ex:
P P8
If you make a mistake, use
beyond the incorrect character, press
enter the new character.
If more than 19 characters are entered, the left side
characters will scroll off the display. (See Note 2)
5
SET
(see Note 1) (see Note 2)
1. Your Company Name or your name must be set as your LOGO because it is required by the Telephone Consumer
Note:
Act of 1991. (For details, see FCC NOTICE at the end of this User's Guide.)
2. To switch between upper and lower character set, press
38
7
repeatedly until display shows;
CAPS
a
n a s o n i c
or
STOP
to move the cursor
CLEAR
then re-
P8
CAPS
SET MODE
(1-6)
ENTER NO. OR
1:USER PARAMETERS?
PRESS SET TO SELECT
LOGO
LOGO
Panasonic
key.
Advertisement
Table of Contents
