Firmware Update - Gigaset S850A GO User Manual

Changing the base settings, registering handsets
•
Switch the base to registration mode to register more handsets to the base. This setting
corresponds to pressing and holding the registration/paging key on the front of the base.
•
Activate or deactivate Eco Mode or Eco Mode+.
•
Change the system PIN for your phone.
•
Activate and deactivate the LED for the registration/paging key on the front of the base.
•
Activate or deactivate the display of VoIP status messages on your handset.
The base settings are on the web page
¤
Settings Management
Rebooting the device or restoring the factory settings
If your phone suddenly does not work as expected, you can reboot it. This frequently resolves
problems.
You can also reset all of the settings on the phone to the default settings e.g. if you want to give
your phone to a third participant. This deletes all settings, lists and directory entries!
¤
Settings Management
Saving and restoring system settings
Once you have configured your base and after each configuration change, you can save the
current base settings in a file on the PC (suffix .cfg). You can reload the file onto the phone again
when necessary.
¤
Settings Management
The contents of the .cfg file include:
•
The settings for the local network (IP configuration)
•
The data for the (VoIP) connections established
•
The assignment of send and receive connections
•
Your own local area code and access code
•
The network mailbox number
•
The Internet services settings
•
The ECO DECT settings

Firmware Update

Regular updates to the base firmware and the provider profile for VoIP connections (general
provider data) are made available on an Internet configuration server. You can download these
updates onto your base as required. The URL for this server is stored in the base.
¤
Settings Management
Starting firmware update
If a new version of the firmware is available, this is downloaded to the base and the base is
restarted. A firmware update lasts approx. six minutes. The duration also depends on the
bandwidth of your DSL connection.
Miscellaneous
Reboot & Reset
Save and Restore
Firmware Update
Web configurator
111