Gigaset S850A GO User Manual page 41

Copying a vCard using Bluetooth
Copy directory entries in vCard format, e.g. to exchange entries with a mobile phone.
Bluetooth mode is activated
The other handset/mobile phone supports Bluetooth.
¤
. . . use
vCard via Bluetooth . . . the Known Devices list is displayed
device OK
Receiving a vCard using Bluetooth
If a device in the Known Devices list sends a vCard to your handset, a directory entry is
automatically created and a message is shown in the display.
If the sending device is not in the list:
device OK . . . the copied vCard is available as a directory entry
Copying directory entries from a smartphone (Gigaset GO)
The phone is connected to the Internet.
The Gigaset ContactsPush app has been installed on the smartphone.
Further information is available at
Synchronising the phonebook with the PC address book
(Gigaset QuickSync)
The Gigaset QuickSync programme has been installed on the computer.
The handset is connected via Bluetooth or via a USB data cable to the computer.
Free download and further information at
to select an entry if needed
. . . use
www.gigaset.com/contactspush
Options
to enter the PIN of the sending Bluetooth
www.gigaset.com/quicksync
Local handset directory
Copy Entry / Copy All
. . . use to select
41