Table of Contents
Advertisement
Description of new and updated functions
Amendment to "Changing the display language"
Amendment to "Changing the display language"
The section amends the section "Handset settings – Changing the display language" in the user guide
for your Gigaset VoIP phone.
Parts of the menu are not displayed in the language selected...
...and three or more handsets are registered on your base. The language set on at least
three handsets is not a standard language of the base. The standard base languages are:
English, French, German, Italian, Spanish, Portuguese and Dutch.
Cause:
On your base, display texts are only stored for the standard languages. In addition, these
display texts can be stored in the base in two other languages or in another language
for two different types of Gigaset handsets. When selecting the language on the hand-
set, these texts are downloaded to the base from the Internet. If another non-standard
language is set on a third handset, some display texts appear in one of the standard lan-
guages on this handset.
Both of the non-standard languages are saved on the base, which are set with the lower
number of internal numbers.
If there is no further handset registered on the base whose type and language setting
correspond to an additionally loaded language, then the memory is freed up. If neces-
sary, the language set for another registered handset is loaded onto the base.
Amendment to "Automatic firmware update"
This section amends the section "Updating the base firmware – Automatic firmware update" in the
user guide for your Gigaset VoIP phone. The "Firmware update reminder" described here only applies
to devices for which a firmware version more recent than 02.140 was already loaded when the device
was bought (manufactured after May 2009).
If you have activated the automatic version check for your phone (
phone, Web configurator page
profile
updates), your phone will check daily whether a newer firmware version is available
from the Internet on the Gigaset configuration server. If this is the case, the message
New firmware available
key f flashes.
If you do not want to perform an update at this time, press the message key f and
respond to the prompt
Your phone will then remind you at a later date about the firmware update
will be displayed again).
available
Please note
If the telephone is not connected to the Internet at the time when the check for new
firmware is to be carried out (e.g. because the router is deactivated), the check is carried
out as soon as the phone is reconnected to the Internet.
26
¢
Settings
is displayed when the handset is in idle status and the message
with
Update firmware?
Miscellaneous, field
. The handset switches to idle status.
§No§
£
user guide for your
Automatic check for software/
(New firmware
Advertisement
Table of Contents
