System
Activating/deactivating music on hold
¤
. . . use
hold
Change (
Setting the IP address of the base station in LAN
Your base station is connected to a router or a PC.
An IP address is required in order for the LAN to "recognise" your phone. The IP address can be
assigned to the phone automatically (by the router) or manually.
•
If the address is assigned dynamically the router's DHCP server automatically assigns an IP
address to the phone. The IP address can be changed according to router settings.
•
In the case of manual/static assignment, you assign a static IP address to the phone. This may
be necessary depending on your network configuration (e.g. if your phone is connected
directly to a PC).
To assign the IP address dynamically, the DHCP server on the router must be activated.
Please also read the user guide for your router.
¤
. . . use
Network
OK
OK . . . then
Address type:
IP address:
Subnet mask:
Standard-Gateway:
92
to select
Settings
= on)
to select
Settings
. . . use
to enter the system PIN (if the system PIN differs from 0000)
¤
IP Address Type: . . . use
With IP Address Type Dynamic: The following fields show the
current settings that the phone obtained from the router. These
settings cannot be changed.
With IP Address Type Static:
fields.
¤
IP Address
current setting) default setting: 192.168.1.2.
¤
Subnet Mask
write current setting) default setting: 255.255.255.0.
¤
Default Gateway
standard gateway
The local network is connected to the Internet via the standard
gateway. This is generally your router.
Default setting: 192.168.1.1.
OK
Audio Settings
OK
System
to select Static or Dynamic
Enter settings for the following
. . . use
to enter the IP address (overwrite
. . . use
to enter the subnet mask (over-
. . . use
to enter the IP address of the
OK
Music on
OK
Local