Repeater - Gigaset S850A GO User Manual

Table of Contents

Advertisement

Locating a handset (Paging), finding the telephone's IP address
¤
Briefly press the Registration/paging key on the base station.
All handsets will ring at the same time ("paging"), even if ringtones
are switched off. Exception: handsets on which the baby monitor is
activated.
The current (local) IP address for the base station appears in the
handset displays.
Ending the search
¤
Briefly press the registration/paging key on the base station
or
Press the End call key
or
Press the display key Silence on the handset
or
No action. After approx. 30 seconds, the paging call will end automatically.
Changing the handset name and internal number
When registering multiple handsets, they will automatically be assigned the names "INT 1", "INT
2" etc. Each handset will automatically be assigned the lowest unassigned internal number. The
internal number is shown as the name of the handset on the display e.g. INT 2. You can change
the names and the numbers of handsets. The name must not exceed 10 characters in length.
¤
. . . the list of handsets is opened, the current handset is highlighted with <
to select a handset . . . possible options:
Edit name:
Edit number:

Repeater

A repeater increases the receiving range between the Gigaset handset and the base station.
The registration procedure for a repeater depends on the version of the repeater being used.
Repeater without encryption, e.g. Gigaset repeater prior to Version 2.0
Repeater with encryption, e.g. Gigaset repeater later than Version 2.0
Further information about the Gigaset repeater can be found in the repeater user guide and at
www.gigaset.com/gigasetrepeater.
Repeater without encryption
Activate Maximum Range/deactivate No Radiation
¤
. . . use
Range
Change (
on the handset
¤
Options
name
. . . use
¤
Options
number
Save
to select
Settings
= on)
No Radiation
Rename
OK
. . . use
to enter a new name
Edit Handset No.
OK
ECO DECT
Change (
Paging
IP: 192.168.1.2
to delete the current
OK
OK
. . . use
to select a
OK
Maximum
= off )
Repeater
Silence
. . . use
81

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents