Wps - TP-Link TL-WR810N User Manual

Chapter 4
• Channel - The current wireless channel in use.
• MAC Address
• WDS Status - The status of WDS connection.
• WAN - This field displays the current settings of the WAN, and you can configure them
on the Network > WAN
• MAC Address
• IP Address - The current WAN (Internet) IP Address. This field will be blank
or 0.0.0.0 if the IP Address is assigned dynamically and there is no Internet
connection.
• Subnet Mask
• Default Gateway
Dynamic IP as the Internet connection type, click
obtain new IP parameters dynamically from the ISP or release them.
• DNS Server - The IP addresses of DNS (Domain Name System) server.
• Traffic Statistics - The router's traffic statistics.
• Received (Bytes)
• Received (Packets)
• Sent (Bytes) - Traffic in bytes sent out from the WAN port.
• Sent (Packets)
• System Up Time - The length of the time since the router was last powered on or reset.
Click Refresh to get the latest status and settings of the router.
4. 2.

WPS

WPS (Wi-Fi Protected Setup) can help you to quickly and securely connect to a network.
This section will guide you to add a new wireless device to your router's network quickly
via WPS.
Note:
The WPS function cannot be configured if the wireless function of the router is disabled. Please make sure the
wireless function is enabled before configuration.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to WPS.
3. Follow one of the following three methods to connect your client device to the
router's Wi-Fi network.
Method ONE: Press the WPS Button on Your Client Device
1. Keep the WPS Status as
- The physical address of the router.
page.
- The physical address of the WAN port.
- The subnet mask associated with the WAN IP Address.
- The Gateway currently used is shown here. When you use
- Traffic in bytes received from the WAN port.
- Traffic in packets received from the WAN port.
- Traffic in packets sent out from the WAN port.
Enabled and click
Configure the Router in Standard Wireless Router Mode
Renew
Add Device.
or Release here to
17