TP-Link TL-WR810N User Manual page 45

Chapter 4
2. Go to Security >
attacked by ICMP-Flood, UDP Flood and TCP-SYN Flood.
• Packets Statistics Interval (5~60)
60 seconds from the drop-down list. The
time section of the packets statistics. The result of the statistics is used for analysis by
SYN Flood, UDP Flood and ICMP-Flood.
• DoS Protection - Denial of Service protection. Select Enable or Disable to enable or
disable the DoS protection function. Only when it is enabled, will the flood filters be
enabled.
Note:
Dos Protection will take effect only when the Statistics in
• Enable ICMP-FLOOD Attack Filtering
• ICMP-FLOOD Packets Threshold (5~3600)
between 5 ~ 3600. When the number of the current ICMP-FLOOD packets is beyond
the set value, the router will startup the blocking function immediately.
• Enable UDP-FLOOD Filtering
• UDP-FLOOD Packets Threshold (5~3600)
between 5 ~ 3600. When the number of the current UPD-FLOOD packets is beyond
the set value, the router will startup the blocking function immediately.
• Enable TCP-SYN-FLOOD Attack Filtering
function.
Advanced Security, and you can protect the router from being
- The default value is 10. Select a value between 5 and
-Check the box to enable or disable this function.
- Check the box to enable or disable this function.
Configure the Router in Standard Wireless Router Mode
Packets Statistics Interval
System Tool > Statistics is enabled.
- The default value is 50. Enter a value
- The default value is 500. Enter a value
-Check the box to enable or disable this
value indicates the
42