Appendix C Specifications - HP 260 G2 Maintenance And Service Manual

C Specifications
Table C-1 Specifications
Dimensions (with stand)
Height
Width
Depth
Approximate Weight
Temperature Range
Operating
Non-operating
NOTE: Operating temperature is derated 1.0° C per 300 m (1000 ft) to 3000 m (10,000 ft) above sea level; no direct sustained
sunlight. Maximum rate of change is 10° C/Hr. The upper limit may be limited by the type and number of options installed.
Relative Humidity (noncondensing)
Operating
Maximum Altitude (unpressurized)
Operating
Non-operating
Power Supply
Rated Voltage Range
Rated Line Frequency
Maximum Operating Power
Idle Operating Power
This system utilizes an active power factor corrected power supply. This allows the system to pass the CE mark requirements for use
1
in the countries of the European Union. The active power factor corrected power supply also has the added benefit of not requiring an
input voltage range select switch.
1
6.9 in 175 mm
7.0 in 177 mm
1.3 in 34 mm
2.3 lb 1.05 kg
41° to 95°F 5° to 35°C
-22° to 149°F -30° to 65°C
15-80% 15-80%
15,000 ft 4572 m
15,000 ft 4572 m
100-240 VAC
50-60 Hz
<65W
30W
103