Transfer Trolley For Loading And Unloading The Machine; Adjusting The Foot Pedal - Miele G 7825 Operating Instructions Manual

Areas of application
Adjusting the foot
pedal
30

Transfer trolley for loading and unloading the machine

 Contaminated surfaces of the trolley must be disinfected, after
the machine has been loaded, using an approved spray disinfect-
ant in accordance with national health and safety regulations.
The Miele transfer trolley can be used to transport mobile units from
the preparation area to the washer-disinfector and from there to the
checking and packing table.
The height of the transfer trolley has to be adjusted by Miele. The
height should be set so that the open machine door is held under-
neath the side catches on the transfer trolley.
The position of the foot pedal on the transfer trolley may also need to
be changed.
Unscrew foot pedal 

Loosen counter nut  on adjusting screw .

Screw adjusting screw  further into the foot pedal, so that the

stopping point is reached earlier.
Re-secure the adjusting screw.

Screw the foot pedal back on.
