Starting A Programme - Miele G 7825 Operating Instructions Manual

Operation
A: Fixed pro-
gramme
B: Free pro-
gramme selection
1. Programme se-
lector
2.  and  but-
tons
44

Starting a programme

See the Programme charts in the Programming Manual supplied
with the machine for detailed information and important notes on the
standard Miele programmes.
 When processing medical devices, any changes made to pro-
grammes or dispensing systems must be documented in a log
book kept with the machine in accordance with the Medical
Devices directive.
The machine's cleaning and disinfecting standards must also be
re-validated.
Set up fixed programme(s) once in operating levels B or D and for free
access in operating level A (see "System functions, Programmes un-
der A free access" in the Programming manual).
Check in the display that the programme shown is the one required.

If several fixed programmes have been made freely accessible, se-
lect the one required using the programme selector.
Press the Start button .

Further information about programme selection can be found in the
Programming manual in "Operating level A".
In operating level B there are three ways of selecting a programme.
1. Programme places 1 - 23 can be selected using the programme se-
lector.
2. Programmes above place 24 are selected using the  and  but-
tons
3. All programmes listed under the "Programme survey".
Turn the programme selector to the required programme.

The programme name will appear in the display.
Press the Start button .

The programme will run.
Turn the programme selector to 24.

From programme 24 upwards:

Press  (scrolls forwards) until the required programme is shown.
From programme 64 downwards:

Press  (scrolls backwards) until the required programme is shown.
Press the Start button .

The programme will run.