Automatic Mobile Unit Recognition (Optional) - Miele G 7825 Operating Instructions Manual

Automatic mobile unit recognition (optional)

18
Automatic mobile unit recognition
The automatic mobile unit recognition feature assigns a programme
place to a mobile unit. The mobile units must be coded with a mag-
netic strip (via a Bit combination).
In operating level C, the only programme available for a coded mobile
unit is the one assigned to the corresponding programme place.
After a coded mobile unit has been put into the machine and the door
closed, the automatic mobile unit recognition system will select the
allocated programme
The processes for coding the mobile unit and for changing pro-
gramme places are described in the Programming manual for the
washer-disinfector.
 Make sure that there are no small metallic objects or instrument
parts attracted to the magnetic strip, in particular to the underside
of it.
Any metallic objects on the strip can result in the coding being in-
correctly read.
Bit 6 (WAK) is not a component part of the modifiable magnetic
strip. Make sure that you code mobile units with side coupling with
a track where Bit 6 is set to I.
Mobile units without side coupling must be coded with a track
without Bit 6
The magnetic strips on G 7823 - G 7826 must have grey magnets.