Interrupting A Programme - Miele G 7825 Operating Instructions Manual

In operating levels
B or D

Interrupting a programme

A programme can only be interrupted in operating levels B and D.
After interrupting a disinfection programme, if you wish to continue
it please check the message in the display at the end of the pro-
gramme. If the message PROCESS PARAMETERS NOT MET is
displayed, it means the door was opened after the disinfection part
of the programme and the disinfection parameters were not ful-
filled. If necessary the programme must be repeated.
If you absolutely have to open the door, e.g. because the load is obvi-
ously unstable (conscious intervention):
Press the Stop button .

The programme is interrupted.
The following will appear in the display:
CANCEL OR>CONTINUE<
Open the door .

For throughfeed machines:
The setting at Machine function/Door interlock determines which
door of the washer-disinfector can be opened, see Programming
manual.
The door on the unclean side can always be opened, regardless of
the setting.
The door on the clean side can then only be opened when the ma-
chine is set to INTERLOCK YES.
Washer-disinfectors used as medical devices (in accordance with
EN ISO 15883) should always be set to INTERLOCK NO
 Caution. Water and items in the machine may be hot.
Danger of burning or scalding.
Where a chemical disinfection programme has been used, be
aware that steam may contain high quantities of disinfecting agent.
Rearrange the load.

Follow infection control regulations and wear protective gloves.
Close the door.

Press the Start button .

The programme will continue.
Operation
47