Transfer Cart For Loading And Unloading The Machine - Miele G 7825 Operating And Installation Instructions

Application
Transfer cart for loading and
unloading the machine
,
When a disinfection process is
being carried out according to
national standards, the
contaminated surfaces of the cart
must be disinfected with a spray in
accordance with national health and
safety regulations, after the machine
has been loaded.
The transfer cart legs are height
adjustable.
Adjust the height so that the opened
door of the lab glassware washer is
held under the sidewise latches of the
transfer cart.
If using the transfer cart with a lab
glassware washer without a base, the
foot pedal position of the transfer cart
needs to be changed.
22
^ Unscrew the foot pedal, a.
^ Loosen the nuts, b, at the adjusting
screw, c.
^ Screw the adjustment screw, c,
further through the foot pedal to
reach the suspension point earlier.
^ Tighten the nuts.
^ Screw in the foot pedal.